Pyrolysis for plastic / polymer removal

According to the plastic and the component to be cleaned SCHWING uses a range of machines and processes for Thermal Cleaning. Thus SCHWING can guarantee optimum plastic / polymer removal at economical prices.

VACUCLEAN-Logo
  • The removal of plastic deposits on tools and long components is usually done with VACUCLEAN in an electrically heated vacuum-cleaning chamber. The temperature is measured directly on the component, which is then slowly and carefully heated, whereby a large part of the attached polymers melt and runoff. At approx. 450 °C the remaining polymers disintegrate, the remaining carbon is then removed by supplied air (oxidation).
Loading a VACUCLEAN 1212T
Photo: Loading a VACUCLEAN 1212 T
Filter bundle in a 6m long VACUCLEAN
Photo: Filter bundle in a 6m long VACUCLEAN
Post processing in an ultrasonic bath
Photo: Post processing in an ultrasonic bath
Microscopic inspection of a spinneret
Photo: Microscopic inspection of a spinneret
INNOVACLEAN-Logo
  • All polymers - even halogenated materials such as PVC or PTFE - including small and medium sized tools and components can be quickly and safely removed with the INNOVACLEAN fluidized bed pyrolysis system. INNOVACLEAN completely carbonizes each polymer from e.g. spray nozzles, perforated discs or spinnerets and assembled spin packs, static mixers, assembled pumps, non-return valves, hot runner components and many other components.
MAXICLEAN-Logo
  • Plastics without halogenated additives are removed with the environmentally friendly MAXICLEAN pyrolysis furnace. The tools and other components to be cleaned are thus not affected mechanically or thermally. MAXICLEAN is especially suitable for especially large tools and complex components.

SCHWING also provides customized test and documentation procedures tools and machine parts that are relevant to quality.

Info Icon   Would you like to find out more or purchase your own device?
Please contact one of our experts or send us a message.